Stamperia Carcano ads

Salt, moisture and frequent cleaning corrode a standard eyebolt long before it wears out mechanically. The C6X807 H.T. is built for exactly those conditions — a rotating eyebolt forged in stainless steel, Grade 60. The ring turns to follow the direction of pull, so the load stays aligned with the lifting point instead of bending the thread sideways. Stainless here isn't a finish. In food processing, marine and chemical environments it's often the requirement, not the preference. The C6X807 H.T. is our Grade 60 rotating eyebolt in stainless steel. Forged in-house. Four sizes, thread M12 to M24, WLL 0.5 to 2.5 t. Spec sheet and 3D model on the product page: carcano.it #liftingpoints #stainlesssteel #grade60 #riggingequipment #CARTEC

A well-made accessory is only part of a safe lift. The rest is the person rigging it. A forged hook with full traceability still has to be chosen correctly, inspected, and used at the right sling angle — and that's a matter of training, not hardware. This is why Carcano runs the CARTEC Safety Academy: structured lifting safety training across four levels, from Base (4h) to a two-day Advanced course, in person or live online with a qualified trainer. New: the Base level is now available on demand, on our own platform — in seven languages, with progress tracking and content released step by step. Free, no time slots, any device. Start with the free Base course, then decide whether to go further. → academy.carcano.it #CARTEC #SafetyAcademy #LiftingSafety #LiftingAccessories #Training

Railway infrastructure runs on parts most people never see. We've been forging them for decades. Pole attachments, turnbuckles, droppers, contact clamps, suspension components — forged in steel, CuNiSi and aluminium, engineered in-house and produced under one roof. Not catalogue parts pulled off a shelf. It's a regulated, high-stakes niche. Section insulators rated for lines running up to 160 km/h. Tensioning pulley systems with a 1:5 counterweight-to-pull ratio. Pole and portal kits CE-marked to EN 1090, from LSU 14 up to 28 metres wide. The same discipline behind every lifting accessory we forge runs through these too: research, in-house design, direct production. Quality you can trace back to the steel it came from. Carcano. Forged to lift, engineered to keep the lines running. 🔗 Discover more https://lnkd.in/eViQkMhb #Carcano #RailwayInfrastructure #Forging #MadeInItaly #Engineering

Salt water doesn't forgive standard steel. In ports, shipyards, offshore platforms, aquaculture and food-processing plants, lifting accessories made of carbon steel — even galvanised — corrode from the surface down. Pitting starts within months, the marking fades, the working load limit drops below the rated value before any visible damage appears. CARTEC G60 — forged stainless steel. Same rated capacity, same forging process, same DGUV-certified hot forging line as the rest of the CARTEC range. Designed for marine environments, salt spray, washdown areas, and any application where carbon steel is the wrong material. Hook, master link, connection link, chain — full G60 stainless range. #liftingaccessories #stainlesssteel #marineindustry #G60 #CARTEC

The emoji we were given vs. the emoji we deserve. One of these has a safety latch that closes under load. One of these has clearly never lifted anything in its life. The latch isn't decoration — it's what keeps the load on the hook. We know which side we're on. #CARTEC #liftingaccessories #rigging #safetyfirst

It's a fair question to ask of any forging plant. ISO 14001 doesn't ask manufacturers to be carbon-free — it asks them to measure, control and continuously improve their environmental footprint. That's the work, and it's auditable. Here's what it looks like in practice at Carcano: solar panels installed since 2011, with an ongoing project to increase the share of self-generated energy. Office climate control powered by the cooling circuit of the production line — heat that would otherwise be wasted. Eco-sustainable packaging across our product range. Digitised documentation to reduce paper consumption. Supplier selection based on ethical, environmental and safety criteria. Industrial manufacturing isn't carbon-free. Managing the impact, year after year, is what the standard asks for — and one of the three pillars behind our recent ESG Recognition from DNV. #Carcano #CARTEC #ESG #ISO14001 #Sustainability #CarcanoGreen #Manufacturing