LI.BE S.r.l. ads

Heat can leave its mark on steel. In this SEL/Z, the temperatures reached during operation were high enough to locally alter the material properties. Hardness measurements show different values along the axial raceway: a clue that helps reconstruct what happened at the contact before the bearing failed. Sometimes, to understand why a bearing failed, you need to read what the material has recorded. #libesrl #madeinitaly #custom #bearings #PrecisionEngineering

Standardising the bearing does not mean standardising the application. Standard preload values are a starting point, but some operating conditions require a specific setting. With FEM analysis and dedicated calculation software, we can study how the stiffness of the SEL/Y MK2 changes with different configurations and define the most suitable preload. This is where standard data gives way to engineering. #libesrl #madeinitaly #custom #bearings #PrecisionEngineering

Returning equipment to service after a bearing-related issue involves more than manufacturing a replacement. LI-BE’s reverse engineering approach considers the application as a whole: we assess the bearing’s role within the system, identify the root cause and evaluate potential improvements. Technical verification and in-house manufacturing carry the process through to delivery of the new solution, with one clear objective: restoring operation while reducing the risk of the same issue recurring. #libesrl #madeinitaly #custom #bearings #PrecisionEngineering

A bearing does not operate in isolation. The outer ring, rollers and shaft are all part of the same mechanical system. If one of these elements deforms, it also changes how the others receive and transmit the load. This is particularly relevant for the outer rings of bearings used in the steel industry. This is why we analyse the system as a whole, taking into account the elasticity of the outer ring and, when necessary, shaft deflection. Pressure distribution depends not only on the bearing design, but also on the conditions in which it will actually operate. #libesrl #madeinitaly #custom #bearings #PrecisionEngineering

Managing bearings across very different diameters requires more than suitable machinery. Within the SEL/Y series, LI-BE covers bore diameters from 50 mm up to 850 mm, for applications such as rotary tables, tilting heads and measuring systems. Across this range, final accuracy depends on the consistency of the entire process: machining, controls, deformation management and dimensional stability after heat treatment. The dimensional range is the visible figure, but the decisive part is the control with which each solution is brought to specification. #libesrl #madeinitaly #custom #bearings #PrecisionEngineering

With tolerances below a micron, there’s no room for compromise, especially in the machines these SEL bearings are made for. Machine tool bearings work under a combination of internal preloads, essential for smooth rotation, rigidity, and minimal run-out, and external forces from cutting operations. At LI-BE, we simulate these real operating conditions to replicate how loads interact under actual use. Because when a bearing operates in complex environments, understanding the contact zones makes all the difference, in precision, reliability, and long-term performance. #libesrl #madeinitaly #custom #bearings #PrecisionEngineering