Bluetest AB

What if your test chamber could fit the whole vehicle? Meet RTS-VIRC, our first reverberation test system built on Vibrating Intrinsic Reverberation Chamber technology. Over-the-air testing of large wireless devices has traditionally happened in pieces: a subsystem here, an antenna there, with results stitched together afterwards. That means missing the interactions that only appear when the whole system is present. Now you can drive a complete vehicle into the chamber, or roll in defense equipment. Run radio performance measurements from 650 MHz to 8.4 GHz and EMC testing up to 18 GHz in the same chamber, with the same setup. For automotive subsystems, an optional turntable supports up to 500 kg. Same Bluetest Flow software. Same repeatability. Just a lot more room. Want to know how it works? Read more at https://lnkd.in/eFK-pter, or book a demo with our team. #OTAtesting #Automotive #EMC #Defense #ReverberationChamber #5G

Webinar Part 3 of 5: Measuring Total Radiated Power (TRP) in a reverberation chamber This is our first active measurement in the series, where the transmitter in the device under test is used. Sara Catteau covers why TRP matters, how it is extracted from the measured quantities and what to watch for in your 5G NR setup. Live demo and Q&A included. Sign up for the session that best fits your schedule, October 28, 2026 at 9:00 CET or 18:00 CET.

In Part 2 of our Distributor Days interview, Jeorge J. Olague Olauge from Optimized Wireless explains how their team uses Bluetest chambers as the step between early design work and live network testing on 5G, 6G and Wi-Fi. Watch the full conversation below.

Faster testing = Faster time to market 🚀 Setting up an anechoic chamber takes time. In a Bluetest reverberation chamber, you place the device inside, close the door and start the test. Total radiated power is characterized in minutes. In this video, Christian Lötbäck, Head of Technology Standards at Bluetest, shows how it works, and why measuring total system performance in a realistic multipath environment tells you more about how your device will actually perform. Engineers in top consumer electronics, automotive and defense use it to run more design iterations in less time. ▶️ Watch below. Want to see it with your own device? Book a demo with our team, link is in the comments. #OTAtesting #RFtesting #ReverberationChamber #WirelessTesting

Our webinar on measuring antenna efficiency is here. This is Part 2 of our 5-part series on what you can measure in a reverberation chamber. Each session takes on one reverberation chamber measurement, explained and then demonstrated live from our Gothenburg lab. On October 1, Sara Catteau walks through antenna efficiency measurements start to finish. Missed Part 1 on chamber loss? This session stands on its own.

Reliable wireless communication is mission-critical for defense and security, but real-world conditions rarely match the lab. Multipath propagation, spectrum congestion, and deliberate interference all affect performance in the field. Bluetest's reverberation chamber test systems deliver realistic, accurate, and repeatable RF testing for defense, security, and wireless communication applications, without the complexity of anechoic chamber setups.